top of page

Auto Vacuum Loader (TC)

Auto Vacuum Loader (TC)
Floor Mounted

The loader is controled by a belt-driven blower which is the best for silent operation and industry used.

FEATURES

  • The separated design of a blower and a suction hopper with mighty horsepower is suitable for long distance conveying. The flexible combination of one blower with one suction hopper up to four suction hoppers can help you to save space and equipment investment cost.

  • That also keeps your resin away the pollution and extend suction points easily for future need.

    Various optional kinds of suction hoppers are available for your different need,such as stainless series for optics,booster series for flexible capacity,glass series and dust-free filter series.(standard suction hopper as factory standard)

  • The blowers are belt-driven that are the best choice for silent operation.(TAIWAN PAT No 231580)

SPECIFICATION

Auto Vacuum Loader (TC)

REMARKS

 

  • The conveying capacity listed on the table is tested with standard new PS granular resin with the motor running continuously. Test condition of conveying capacity: Vertical conveying height=4M, Horizontal conveying length=5M

  • Conveying capacity varies with the shape and bulk density of the resin, piping, conveying length & height, power supply frequency and other factors.

  • Plastic material of Bulk density: 0.68 kg/L, Material with Powder calculated at 40%.

  • ​For the best result, please choose the loader according to 80~85% of loading capacity.

  • We reserve the right to change specifications without prior notice.

pdf
QR code

OPTION

Patented Vortex Cyclone(VC) Patented Filter Set

01

Patented Vortex Cyclone(VC)

Works with any auto loaders to stop the regrinded resin from discharging to the surrounding area. TAIWAN & CHINA PAT.

02

Patented Filter Set

As optional equipment from YANN BANG is perfect for dust-free of indoor working place. To do the filter routine maintenance is so easy without dirtying your hands and place. Unload the filter set without opening the cover until move to the please you want to clean.
TAIWAN& CHINA PAT.

FAQ

    1. Adjust the air damper of stainless suction probe.

    2. Clean or replace the paper filter.

    3. Check the air hose of auto-loader is whether damaged.

    4. Examine the limit switch, contactor overload, timer, and motor running well or damage.

    5. The belt of blower for TC-6 Loader is loosen or broken.

    6. Check the tube or material hose is plugged.

    7. Power insufficient.

  • IC board malfunction to cause the line. # ③ & ④ discounted.
    PS. OL – Motor overload, PS - no carbon brush.

  • Check the Limit Switch disconnected.

  • IC board or buzzer breakdown to cause the IC board malfunction.

    1. If suction hopper equipped on the hopper dryer and find the plugged of air outlet of hopper dryer, cause the material is unable to fall by pressure increasing.

    2. Happen the static. (must do grounding) 

    3. Find the bridge or suction full of material in the suction hopper. (please reserve enough space)

bottom of page