top of page

Auto Vacuum Loader (BL)

Auto Vacuum Loader (BL)
Hopper Mounted

Hopper Mounted auto loader is the freestanding type of vacuum loader which can install upon a hopper on the dryer or molding machines.

FEATURES

  • BLZ: traditional panel
    BLE: touch panel

  • Compact size, light weight, low noise, easy operation and installation, suit to convey one kind of resin or material, can install upon a hopper dryer or molding machine directly.

  • Easy use by the three phase powerful induction motor.

  • Suitable for medium to large size machines, such as extrusion molding machine.

SPECIFICATION

Auto Vacuum Loader (BL)

REMARKS

 

  • The conveying capacity listed on the table is tested with standard new PS granular resin with the motor running continuously. Test condition of conveying capacity: Vertical conveying height=4M, Horizontal conveying length=5M

  • Conveying capacity varies with the shape and bulk density of the resin, piping, conveying length & height, power supply frequency and other factors.

  • Plastic material of Bulk density: 0.68 kg/L, Material with Powder calculated at 40%.

  • ​For the best result, please choose the loader according to 80~85% of loading capacity.

  • We reserve the right to change specifications without prior notice.

pdf
QR code

STANDARD ACCESSORIES

  • Motor overload protector

OPTION

Air Accumulator

01

Air Accumulator

Air accumulator is perfect conveying mixed resin with powder and granule, heavy powder resin, regrinded resin, or flake resin.Prevent the damage of your motor from dust and lengthen the machine life time. Save your energy and material cost.

02

MIB

Material Inlet Base(MIB) is fitted between suction hopper and molding machine for direct filling material without shortage.

MIB
Static Eliminator

03

Static Eliminator

The static eliminator could separate the dust and the pellet easily to improve product quality and decrease defective rate. This is one of the best solutions for LCD panels, compact disc, optical lenses, and optics related vendors.

FAQ

    1. Adjust the air damper of stainless suction probe.

    2. Clean or replace the paper filter.

    3. Check the air hose of auto-loader is whether damaged.

    4. Examine the limit switch, contactor overload, timer, and motor running well or damage.

    5. The belt of blower for TC-6 Loader is loosen or broken.

    6. Check the tube or material hose is plugged.

    7. Power insufficient.

  • IC board malfunction to cause the line. # ③ & ④ discounted.
    PS. OL – Motor overload, PS - no carbon brush.

  • Check the Limit Switch disconnected.

  • IC board or buzzer breakdown to cause the IC board malfunction.

    1. If suction hopper equipped on the hopper dryer and find the plugged of air outlet of hopper dryer, cause the material is unable to fall by pressure increasing.

    2. Happen the static. (must do grounding) 

    3. Find the bridge or suction full of material in the suction hopper. (please reserve enough space)

bottom of page